Project Gallery

Project Summary

A demolition contractor prepared the concrete before our arrival and loaded the crusher using their excavator. Metal reinforcement was separated during processing.

Project Summary

The removed slabs were stockpiled near the driveway with sufficient access for the crusher. The processed material remained on-site for the landscaping contractor.

Project Summary

The property had limited access and no equipment available to load the crusher. Material handling support was provided as part of the service.

Project Summary

The contractor prepared manageable concrete pieces and loaded the crusher with a compact excavator. Nearly all processed material was reused within the project.

Project Summary

The pile contained sections of wire mesh that required additional sorting. The contractor supplied loading equipment and separated exposed metal during processing.

Project Summary

Large stones were pre-broken before processing. The resulting material was distributed across drainage areas and a private gravel driveway.

Project Summary

The concrete was removed and prepared before arrival. Crushing on-site helped avoid multiple disposal-bin loads and reduced the amount of new fill required.

Project Summary

The general contractor provided an excavator and operator. Crushing was coordinated with the demolition schedule so the processed aggregate could be used immediately.

Project Summary

The customer required both crushing and material handling. The finished aggregate was placed in separate areas for backfill and temporary construction access.

Project Summary

The stone was generated during grading work for a new residential property. Oversized pieces were reduced before entering the crusher.

Project Summary

The project was completed in coordination with the demolition contractor. Prepared material was processed in stages to avoid interrupting other work on the site.